Precision turning parts processing steps

The processing procedure of turning parts is a very important process in the manufacture of parts, the need for mechanical processing according to certain principles, we will be in accordance with the pre operation, operation, operation and analysis of processing steps turning parts
First, before the operation
1, the operating personnel must be in strict accordance with the operating rules of wear related protective articles;
2, the operating personnel before operation to check the electrical parts to determine whether normal, no problem can be started.
Two, operation
1, to ensure the operation of the workpiece clamping tool, such as firm, industry, etc. the workpiece clamping;
2, various types of machine boot should be low idle, to ensure that no problem should be carried out after the operation;
3, the machine table is prohibited put other things unrelated;
4, operators do not hand to remove excess iron, should be cleaned with special tools, but also to stand in a safe position, avoid machine movement when iron splash;
5, in the operation of the machine tool, the operating personnel prohibited to re adjust the transmission or change the operating stroke, not a hand to touch the surface processing, no longer in operation measuring size, not across the machine transmission part transmits the goods;
6, in the process, must strictly abide by the rules of operation, shall not leave work in the operation of the machine tool, left to cut off the power, adjust the speed, stroke, tool etc. should be stopped, can not be carried out in a machine operation.
Three, after the operation
1, after the completion of the power supply is cut off, remove the tool, each part of the handle back to neutral, and lock the switch box;
2, iron and other cleaning equipment, and the lubricating oil injection guide, prevent rust.